Nylon plastic material is most widely used, especially PA6, PA66, PA12, but not all of the nylon material are needed for surface treatment. In general, as used in the automobile parts (the rearview frame, car bumpers, nylon) mobile phone shell, door handle, nylon frames (sun, wind, nylon 3D), anti-theft network, a bicycle frame, water heater, motorcycle chassis shell etc.. Making these when the workpiece is almost not used nylon material pure, and will add a glass fiber, carbon fiber, refractory material etc.. More common is adding glass fiber, respectively: PA+15%GF, PA+30%GF, PA+50%GF, PA+60%GF.

[please click: Nylon with instructions for use]

   According to the demand of the market, our company specially developed a nylon adhesive agent, also known as: nylon, nylon, nylon universal bottom bottom adhesion promoter, nylon, nylon water medium (primer), nylon and glass fiber adhesion is very good. Easily through theEasily through the hundred grid, salt spray, wear resistance, alcohol, water, high and low temperature, constant temperature and humidity and a series of strict tests.

   Nylon material to achieve excellent adhesion, must disrupt the surface molecules, increase its value by, is conducive to enhance the adhesion of nylon. Flame method is through oxidation of nylon surface molecules, which formed a band electron polar functional groups on the surface, improve the surface, thus improving and coating adhesion. But the flame method must be applied in half an hour, otherwise the surface oxygen levels drop, will not reach the requirements of adhesion.

   Nylon bottom water in hand spraying or automatic line spraying are very convenient to use. After sprayed nylon bottom water can best be 60 degrees bake for 5 minutes, if there are no conditions, can also direct wet wet. In a word, using the time to try to use in accordance with the engineering conditions.

Nylon series with our company are as follows:

PA-308 nylon bottom water: mainly for improving adhesion between pure nylon.

PA-308B nylon bottom water: mainly with 30% glass fiber nylon adhesion improvement.

PA-308A nylon bottom water: mainly with 50% glass fiber nylon adhesion improvement

   Welcome the agent or direct purchase to our Nylon bottom water

[please click: Nylon with instructions for use]

   Luo: 15999818729QQ:1299910351